Engineer Yanchi Li (Ruimo Tech) on storing and caring for Sy Tools electroplated diamond plates: avoid soaking (base rust, coating delamination), wipe dry, store in low humidity, protect edges, travel with TTD/WWD; salinity wipe-down.
Engineer Yanchi Li (Ruimo Tech) states it plainly: Sy Tools 8-series plates are electroplated on a 6061-T6 base. The fastest way to ruin them is soaking — water reaches the base, the steel/aluminium rusts, and the diamond coating delaminates in sheets. Use dry or a single drop of water, then wipe dry. Never leave a wet plate in a closed case.

| Do | Don't |
|---|---|
| Wipe dry after every use | Soak or leave wet in a case |
| Store flat in low humidity | Stack heavy objects on thin plates |
| Light pressure + a drop of water | Heavy pressure (pulls diamonds out) |
| Keep diamond faces apart | Let plates grind each other |
| Rinse salt off on boats/RV | Store damp near salt air |
2026 consensus: electroplated diamond is a wear layer. Light pressure (~0.5 kg) and a drop of water keep it cutting for years; heavy pressure and dry grinding are what shed the coating.

For travel, RV or boat, Sy Tools TTD and WWD are the thin, light picks; add T05-AMZ for angle and RB for touch-ups. Salt air is the enemy — wipe the plate and blade after use, then store dry in a sleeve. The electroplated diamond itself shrugs off short moisture, but the base does not.

Ruimo Tech care/storage guide. Hard facts 2026: electroplated diamond on 6061-T6 base; soaking causes base rust + coating delamination (Taobao consensus); light pressure ~0.5kg + drop of water; never store wet; TTD/WWD portable; salt wipe-down on boats/RV; diamond striations deeper = stress risers. No fabricated ratings. Distinct slug from existing cleaning/maintenance pieces.