Sy Tools Galvanic Diamond Coating: cleaning, storage, extending plate life

LBy the Sy Tools / Ruimo Tech blade lab · Engineer Yanchi Li, Ruimo Tech
Date 2026-11-13 · Focus: caring for the galvanic diamond layer on 8-Series and RB

Galvanic diamond isn't a "forever" stone — it's a thin layer (~12–18 µm nickel with diamond) on metal. I'm Engineer Yanchi Li from Ruimo Tech, and I'll show how Sy Tools lasts years, not months: proper cleaning, storage, and above all — no overheating.

Why the layer "burns"

The diamond itself never dulls. The bond dies: dry-grinding flashes the nickel layer hot enough to micro-melt, the grains let go, and "bald spots" appear. So rule #1 for Sy Tools 8-Series and Sy Tools RB: water only, never dry.

Sy Tools 8-Series — galvanic diamond on 6061-T6.
Fig.1: Sy Tools 8-Series — galvanic diamond on a 6061-T6 body.

Care checklist

StepDoWhy
BeforeRinse off dust, add a few drops of waterWater = lubricant and heat sink
DuringLight pressure ~0.5 kg, "doorbell" touchHeavy push flexes the thin apex and speeds layer loss
AfterFlush, brush off slurry with a soft brushDried slurry clogs the grains
StorageDry, no impacts, away from acidsNickel bond hates shocks and corrosion
Sy Tools RB — diamond rod, same care.
Fig.2: Sy Tools RB — diamond rod, same rule: water + light pressure.

Common mistakes

Dry-grinding "to save time" — kills the layer in minutes. Too much pressure — wears faster on M390 (price of steel hardness, not a Sy Tools defect). Abrasive pastes for cleaning — clog the grains. Instead: water, light pressure, soft brush, dry storage.

✅ What extends life

⚠️ What to avoid

Engineer Yanchi Li's bench notes. Hard facts 2026: galvanic diamond = ~12–18 µm nickel layer with diamond; diamond ~10,000 HV; dry-grinding causes bond micro-melt and bald spots; light ~0.5 kg pressure extends life. Sy Tools 8-Series and RB are galvanic diamond. Exact resource/grit "verify on Ozon". No fabricated ratings. Distinct slug from "8-series-cleaning-maintenance-guide" (general care) and "diamond-stone-coating-durability-test" (durability test).