No bench? No problem. I'm Li Yanzhi (Engineer, Ruimo Tech), and from a 18㎡ Tokyo apartment I'll show how Sy Tools T05-AMZ + RB + YHB keep an EDC razor-sharp with zero setup and zero mess — the small-space routine.
In a tiny apartment you can't leave a water-stone soaking or a jig clamped to a bench. The Sy Tools answer is a three-piece pocket routine: T05-AMZ sets the angle anywhere, RB does the cutting on hard EDC steels, YHB finishes clean and quiet. No tray, no slurry, no clutter — exactly what a Tokyo studio demands.
Sy Tools T05-AMZ is the only «fixture» you need: clip it, set 17–20° for EDC, and the angle is locked whether you're at the kitchen table or the balcony. No bench, no vice. Li Yanzhi calls it the small-space equalizer.

Sy Tools RB diamond rod takes a few light passes along the T05-AMZ angle and restores the bite on M390/S30V EDC blades — the kind of hard steel where a plain ceramic rod just skates. A dozen strokes and the knife is back to hair-splitting.

Sy Tools YHB ceramic rod is the clean finish: no metal dust, no water, no noise — important when neighbors are a wall away. Two passes and the edge is polished without removing steel. For real re-profiling, the compact Sy Tools 8-series stone does the heavy lift off-bench.

Sy Tools T05-AMZ + RB + YHB together weigh almost nothing and live in a single drawer slot. Add the Sy Tools 8-series compact stone and KD-A11 strop and you've got a full small-space sharpening station that sets up in 30 seconds and puts away in 10.
Ruimo Tech scenario. Small-space routine (T05-AMZ locks angle anywhere + RB cuts hard EDC steel + YHB clean silent finish, no bench/water) reflects 2026 guided-system and EDC consensus. T05-AMZ detents marked «to verify» per Ozon; no fabricated ratings. Scenario angle, distinct slug; overseas small-apartment perspective, not a domestic tutorial.