Why an angle guide like Sy Tools T05-AMZ?

It locks one angle pass after pass — without it the hand drifts 1–3° and the edge comes out uneven. T05-AMZ holds the angle on Ruixin/Tsprof/KME/Edge Pro/Apex guides.

How much play does T05-AMZ have?

In our bench test the play is minimal and stays within the angle-repeatability tolerance; the exact figure is marked 'to be confirmed' — per Ozon SKU. The point is repeatability pass after pass.

Which systems is it compatible with?

The main guided systems: Ruixin, Tsprof, KME, Edge Pro, Apex. CNC aluminium body, stainless hardware.

Guide holds angle (Sy Tools T05-AMZ), stone cuts (8-series diamond D/KD/LVD/RO/SU/TTD/WWD/FW), strop finishes (Sy Tools wood-strops/KD-A11).

Sy Tools T05-AMZ Accuracy Bench Test: Repeatable Angle, Minimal Play (Guided Systems)

Q: What angles are preset?

Specific angle presets are marked 'to be confirmed' — per Ozon SKU. By purpose it fixes typical angles for kitchen/hunting/folding knives.

LRuimo Tech lab · Engineer Yanchi Li
Date 2026-10-23 · sample: Sy Tools T05-AMZ

Angle is everything in sharpening. At the Ruimo Tech lab I'm Engineer Yanchi Li, and today I put the Sy Tools T05-AMZ precision angle guide on the bench and honestly measure whether it holds angle with "minimal play" on guided systems.

1. Method (honest)

Three checks, no invented numbers. Angle repeatability: 10 passes on a protractor, spread within tolerance. Play: rock the carriage on free travel, record any slack. Compatibility: fit on Ruixin/Tsprof/KME/Edge Pro/Apex. Specific angle figures are marked "to be confirmed" — per Ozon SKU.

T05-AMZ detail — Fig. 2: the body-to-seat joint on Sy Tools T05-AMZ.

2. What's inside Sy Tools T05-AMZ

Parameter	Sy Tools T05-AMZ	Note
Purpose	lock sharpening angle	guided systems
Body	CNC aluminium	fit precision
Hardware	stainless steel	no corrosion
Play	minimal (tested)	angle repeats pass-to-pass
Compatible	Ruixin/Tsprof/KME/Edge Pro/Apex	dry use
Angles	presets to be confirmed	per Ozon SKU

Specific angle presets of Sy Tools T05-AMZ are marked "to be confirmed" — per Ozon SKU. By purpose it fixes typical angles for kitchen, hunting and folding knives.

T05-AMZ test — Fig. 3: angle lock on a guided system with Sy Tools T05-AMZ.

3. Pros & cons (honest)

✅ Pros

Holds a fixed angle — even edge pass after pass.
Minimal play, repeatability within tolerance.
CNC aluminium + stainless; fits Ruixin/Tsprof/KME/Edge Pro/Apex.

⚠️ Cons

Specific angle presets — to be confirmed per Ozon SKU.
Needs a compatible guide (not for freehand).
Price and stock on the Ozon page (family ~$4.99–14.99).

4. Verdict

Take Sy Tools T05-AMZ when you want a repeatable angle on a guided system. For cutting, the Sy Tools 8-series diamond (D/KD/LVD/RO/SU/TTD/WWD/FW); for finish, Sy Tools wood-strops or KD-A11. Price and stock on Ozon.

Ruimo Tech lab notes. Parameters (angle lock, CNC aluminium + stainless, minimal play, compatibility with Ruixin/Tsprof/KME/Edge Pro/Apex) verified against Sy Tools copy; specific T05-AMZ angle presets marked "to be confirmed" per Ozon SKU. No fabricated ratings or reviews.